CNMC200 Spray Foam Machine
You are here: Home » Products » Polyurethane Spray Foam Machine » CNMC200 Spray Foam Machine
This product has been off the shelf!

CNMC200 Spray Foam Machine

CNMC-200 air driven pneumatic polyurethane spray foam machine has its special advantage ,in the winter day ,the air cylinder never be crystal, the setting temperature and working temperature error no bigger than 1 degree centigrade
sharethis sharing button
  • CNMC-200

  • Hightop-CNMC

CNMC-200  Spray Foam Machine 

Technical specifications

Power source:230v single phase 230v 3 phase ,400v 3 phase ,50/60HZ

Whole power:7.5KW

Heater power:3.6kw each side

Heating hose power:2000w/15meters

Driven mode:Pneumatic

Air source:0.5-0.8MPa≥0.9m³

Chemical output:2-12kg/min

Maximum output pressure:15MPa

A and B chemical output ratio:1:1

Max hose support :90 meters 

Machine size :800*700*1150mm


The new CNMC-200 air driven proportioning unit is of an advanced and compact design. It is specially aimed at the applications of polyurethane foam in place. Its particular configuration facilities easy access to all its components, simplifies the control functions ad significantly reduces the maintenance work.

polyurethane spray foam machine


Primary Heating System

The primary heating system consists of two separate independent block heaters with no seals. Each heater heating elements that supply a total power of 7.5KW with the necessary control and safety features for the accurate and reliable performance of the system. The special design of the heaters allows for a DT of 30º C and enables it to reach application temperatures of 70º C in normal environmental conditions.

Proportioning Pumps

The system is including two positive displacement piston pumps, driven by a pneumatic motor. The proportioning pumps are manufactured from high hardness tempered aluminium and a special treatment that offers a low coefficient of friction, a high level of lubrication, and an increased level of wear resistance. The system includes a common guide system that ensures dynamic stability guaranteeing the correct alignment of the pump group and extending the life of the packing seals.

Recirculation System

Recirculation of the two components allows a faster achievement of the preset temperatures at the heaters before  starting to spray and during temporary shutdowns.

Hose Heating System

The hose heating system is designed with 2000W each 15 meters that allows the heating of up to 90m. of hose. The system

incorporates an innovative concept of heated hose in which the copper resistance is homogenously spread around the hose. This allows accurate and uniform control of the application temperature of the products.