- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
Views: 9 Author: Site Editor Publish Time: 2020-11-23 Origin: Site
The spraying polyurea construction work should be carried out under the conditions that the construction environment temperature is greater than 5°C, the relative humidity is less than 85%, and the base surface temperature is 3°C greater than the dew point temperature.
If the temperature of the construction environment is too low and the relative humidity in the air is too high, the moisture in the air is easy to condense on the surface of the base layer. Because the temperature of the material sprayed on the surface of the base layer is higher, and the crosslinking reaction exotherms, it is It is very easy to vaporize moisture, and then produce film defects such as pinholes and holes in the rapid prototyping polyurea coating, so it is particularly important to control the temperature and humidity of the construction environment.
During the spraying polyurea construction operation, if the wind speed is too high, it is difficult to operate, and the material is flying around, and it is difficult to form a uniform coating. Therefore, it is not suitable to perform spraying operations if the construction is in the open air environment with wind level 4 and above. Yes, spraying in the open air is strictly prohibited in rain and snow.
For more information on polyurethane, please continue to pay attention to the polyurethane manufacturer Hightop Machinery.
Polyurethane elastomers are typical multi-block copolymers, where the molecular chain consists of flexible chain segments with a glass transition temperature below room temperature and rigid chain segments with a glass transition temperature above room temperature. The oligomer polyol constitutes th
Cold storage spray polyurethane focuses on the overall seamless condition after spray foaming. Polyurethane has good density, insulation and cold resistance. It is basically a closed cell structure. It not only has excellent thermal insulation properties, but also has good resistance to freezing and
In order to select the shrinkage rate of large cast polyurethane elastomer products more accurately, the influences of process conditions, environmental factors and product structure on the shrinkage rate were systematically investigated, and the change curves of shrinkage rate with time were measur
On June 8, the CNMC-A25 polyurea spraying machine produced by Hightop Group was loaded in Hightop Group Industrial Park and will be exported to Italy. CNMC-A25 polyurea spraying machine is widely used in industrial maintenance, tunnel, subway, roadbed waterproofing, foam film and television props pr
On May 27th, the CNMC-E3 polyurethane spraying machine produced by Hightop Group was loaded in Wente Industrial Park and will be exported to the Italy. CNMC-E3 polyurethane spraying machine is widely used in industrial maintenance, tunnel, subway, roadbed waterproofing, foam film and television pro
On August 2, CNMC-E3 polyurethane spraying machine was loaded in the industrial park and will be exported to France soon.CNMC-E3 polyurethane spraying machine is widely used in industrial maintenance, tunnel, subway, waterproofing of road base, production of foam film and television props, pipeline
For the polyurea spraying equipment should take how to recommend1, polyurea is a set of waterproof, anticorrosion, wear-resistant, protection of multiple performance materials, but there is a certain range of tolerance, polyurea's recommended temperature range for the use of -40 ℃ -120 ℃.2、 Polyurea
Polyurea waterproof and anti-corrosion construction is generally spraying operation, in front of the small series to tell you why the reason for spraying, I believe everyone should have understood, now is about the construction process of the problem, let's take a look at it.Summary of polyurea wate
One. Corrosion resistanceIn addition to hydrogen acid, concentrated nitric acid and some strong oxidants, polyurea coatings show good stability in acid, alkali, salt, seawater, oil and other media, in the salt spray medium to do a strengthening comparative experiment, 1000 hours later, polyurea and
1. Increase efficiencyThere's a reason operators don't like manual mixing. It's a repetitive, physically demanding, and inefficient job. This includes manual heating and mixing of elements, trying to guess the correct dosage and loading the mixed paint into the spray system. It's becoming increasing