- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
Views: 17 Author: Site Editor Publish Time: 2020-12-16 Origin: Site
When the skin comes into contact with the combined polyether, use soap and water to rinse.
When handling isocyanate, you should pay special attention, because it has a certain irritation, do not inhale its vapor, and do not splash on the skin and eyes.
If it splashes on the skin and eyes, it must be wiped off with sanitary napkins immediately, and then rinsed with plenty of water for 15 minutes, and then rinsed with soap or alcohol. If it is still serious, it should be treated immediately. Once a large area of isocyanate spills on the ground, apply sand and wood chips to cover the ground, and then wash the ground with a lot of water. When clothes are contaminated with isocyanate, they must be treated with a solution containing 50% ethanol, 45% water, and 5% concentrated ammonia, and then washed with soap.
Note: Please pay attention to storage methods and safe operation.
Polyurethane related applications and equipment
The company is the largest professional manufacturer of polyurethane insulation materials in China, with more than 10 years of experience in R&D and production.
Polyurethane elastomers are typical multi-block copolymers, where the molecular chain consists of flexible chain segments with a glass transition temperature below room temperature and rigid chain segments with a glass transition temperature above room temperature. The oligomer polyol constitutes th
Cold storage spray polyurethane focuses on the overall seamless condition after spray foaming. Polyurethane has good density, insulation and cold resistance. It is basically a closed cell structure. It not only has excellent thermal insulation properties, but also has good resistance to freezing and
In order to select the shrinkage rate of large cast polyurethane elastomer products more accurately, the influences of process conditions, environmental factors and product structure on the shrinkage rate were systematically investigated, and the change curves of shrinkage rate with time were measur
On June 8, the CNMC-A25 polyurea spraying machine produced by Hightop Group was loaded in Hightop Group Industrial Park and will be exported to Italy. CNMC-A25 polyurea spraying machine is widely used in industrial maintenance, tunnel, subway, roadbed waterproofing, foam film and television props pr
On May 27th, the CNMC-E3 polyurethane spraying machine produced by Hightop Group was loaded in Wente Industrial Park and will be exported to the Italy. CNMC-E3 polyurethane spraying machine is widely used in industrial maintenance, tunnel, subway, roadbed waterproofing, foam film and television pro
On August 2, CNMC-E3 polyurethane spraying machine was loaded in the industrial park and will be exported to France soon.CNMC-E3 polyurethane spraying machine is widely used in industrial maintenance, tunnel, subway, waterproofing of road base, production of foam film and television props, pipeline
For the polyurea spraying equipment should take how to recommend1, polyurea is a set of waterproof, anticorrosion, wear-resistant, protection of multiple performance materials, but there is a certain range of tolerance, polyurea's recommended temperature range for the use of -40 ℃ -120 ℃.2、 Polyurea
Polyurea waterproof and anti-corrosion construction is generally spraying operation, in front of the small series to tell you why the reason for spraying, I believe everyone should have understood, now is about the construction process of the problem, let's take a look at it.Summary of polyurea wate
One. Corrosion resistanceIn addition to hydrogen acid, concentrated nitric acid and some strong oxidants, polyurea coatings show good stability in acid, alkali, salt, seawater, oil and other media, in the salt spray medium to do a strengthening comparative experiment, 1000 hours later, polyurea and
1. Increase efficiencyThere's a reason operators don't like manual mixing. It's a repetitive, physically demanding, and inefficient job. This includes manual heating and mixing of elements, trying to guess the correct dosage and loading the mixed paint into the spray system. It's becoming increasing