OPERATION PROCESS AND PRECAUTIONS OF HIGH PRESSURE AIRLESS POLYURETHANE SPRAY FOAMING MACHINE
You are here: Home » News » OPERATION PROCESS AND PRECAUTIONS OF HIGH PRESSURE AIRLESS POLYURETHANE SPRAY FOAMING MACHINE

OPERATION PROCESS AND PRECAUTIONS OF HIGH PRESSURE AIRLESS POLYURETHANE SPRAY FOAMING MACHINE

Views:8     Author:Site Editor     Publish Time: 2020-11-19      Origin:Site

As a high-quality and demanding machine, the high-pressure airless polyurethane spray foaming machine has relatively high operating requirements. The following briefly introduces its operation process and precautions:


Before coating, it is necessary to prepare all necessary items for painting. The necessary items for painting include paint and thinner, paint agitator, weighing equipment, polyurethane spray foaming machine and supporting appliances, paint and coating Testing equipment, etc. In addition, the deployment of paint and machine debugging must be carried out.


The proportion of coating;

Confirm the paint: Confirm the type and quality of the paint according to the painting requirements, and correct the problem in time.

Adjust the viscosity of the paint: Stir the paint thoroughly and measure the viscosity of the paint. If the viscosity is too high, add a thinner to adjust the viscosity to a proper viscosity.


Installation and inspection of polyurethane spray foaming machine;

Installation: Correctly install and connect the parts and auxiliary accessories of the prepared polyurethane spray foaming machine.

Coating environment condition control: Measure the temperature and humidity of the spraying environment to meet the coating conditions, and the coating operation can be carried out. Outdoor painting should also consider weather factors. During a period of time from spraying to drying of the coating surface, rain and weather with high wind speed and heavy sand should be avoided.

Check: The polyurethane spray foaming machine is installed and connected and enters the state of waiting for spraying. Before spraying, check whether the power source is operating normally, and then suck in the paint, check whether the high-pressure paint cylinder is pressurized normally, whether the delivery hose is leaking, and the accessories are connected Whether it is tight, whether the spray gun and filter are blocked, etc. Find faults and eliminate them in time.


For more information on polyurethane, please continue to pay attention to the polyurethane manufacturer Hightop Machinery.

HOT NEWS

ABOUT US

Shandong Hightop Machinery Co.,LTD. (CNMC) is the leader in polyurethane technology, offers the best, most effective partner for high quality plural polyurethane and polyurea component systems.

CONTACT US

   hightoptools001
   sales@chnmach.com
    +86 5373151560
   +86 18653673192
Copyright © Shandong Hightop Machinery Co.,LTD. All rights reserved