Views: 9 Author: Site Editor Publish Time: 2021-01-14 Origin: Site
The key to the construction quality of spraying polyurea lies in the substrate, and the substrate is divided into two types: metal substrate and concrete substrate, but no matter which kind of substrate, we must consider its anti-corrosion and waterproofing. So, what are the ways to deal with the anti-corrosion and waterproofing of the polyurea sprayer substrate? Next, let us know about it.
The anticorrosive and waterproof treatment of the base material of the polyurea spraying machine can be shot blasting the concrete preforms or use an angle grinder and a high-pressure water gun to remove the dust and scum on the surface, and then use the caulking material to level the surface after the base material is completely dry. Moreover, the caulking part needs to be smoothed with an angle grinder after the caulking material is cured, and then shovel to remove the surface dirt, brush or roll a matching primer for use, and the primer recoating distance is up to 24 Hours, the shortest is 3 hours.
The treatment method for the metal substrate of the polyurea spraying machine is to blast the substrate to Sa2.5 level first, and level the defective parts such as welds with epoxy putty, so that the entire substrate can be smoothly transitioned, and the epoxy putty After curing, use an angle grinder to smooth, and then clean the substrate, roll or brush two matching primers.
All in all, polyurea spraying machine uses special functional resin modified semi-polyurea to obtain semi-polyurea with excellent functions, wide use and high cost performance, which meets the diversified requirements of the national economy, and its development scope will be more and more wide.
Rigid polyurethane foam is widely used in Europe and the United States for building roofs, walls, ceilings, floors, doors and windows, and other thermal insulation materials because of its light weight, low thermal conductivity, good heat resistance, aging resistance, easy to bond with other substra
On July 15, CNMC-E3 polyurethane spraying machine produced by Winter Machinery was loaded in Winter Industrial Park and will be exported to Russia soon.CNMC-E3 polyurethane spraying machine is widely used in industrial maintenance, tunnels, subways, waterproofing of road base, foam film and televisi
Foam Expo will be held in Detroit, Michigan, USA on June 20-21, 2023. Foam Expo serves all types of foams and raw materials used in the manufacture of foam and foam-related products, including the consumer and industrial foam markets. The show will showcase solutions for molded, rigid and flexible f
CNMC-E3 polyurethane foam spraying machine shipped to USA.Voltage: 110V, equipped with 1 gun, 1 lifting pump, 1 Graco pipe, 1 round nozzle of gun, 2 meters of air hose, 1 tool box.
All family members:According to the provisions of the national statutory holidays, and taking into account the actual situation of the company, the following arrangements are made for the May Day holiday in 2023: I. Saturday, April 29 (Saturday) - Wednesday, May 3 (Wednesday) holiday transfer, a tot
Can you believe it? After spraying polyurea in the bamboo basket, the bamboo basket can be used to fetch water to make it drip-proof; after spraying polyurea on the outside of the watermelon, no damage can be seen even if it is dropped from the 15th floor.That's right, polyurea, the "king of coating
On October 22, the CNMC-E3 polyurethane spraying machine produced by Hightop was loaded in the Hightop Industrial Park and will be exported to Germany soon. CNMC-E3 polyurethane spraying machine is widely used in industrial maintenance, tunnel, subway, roadbed waterproofing, foam film and television
On October 22, the CNMC-E3 polyurethane spraying machine produced by Hightop was loaded in the Hightop Industrial Park and will be exported to Germany soon. CNMC-E3 polyurethane spraying machine is widely used in industrial maintenance, tunnel, subway, roadbed waterproofing, foam film and television
On October 16, Liu Xiaolin, Secretary of the Party Working Committee and Director of the Management Committee of Jining Economic Development Zone, Xu Gang, member of the Party Working Committee and Deputy Director of the Management Committee, and other leaders visited Gentop workshop to inspect and
All employees:According to the provisions of the national statutory holidays and the actual situation of the company, the following arrangements are made for the National Day holiday: 1. From October 1st (Saturday) to October 7th (next Friday), there will be a total of 7 days off;All day on October
content is empty!