CNMC-E2 + POLYURETHANE RAW MATERIAL FOR SPRAYING MACHINE EXPORTED TO THE UNITED STATES

CNMC-E2  Spraying Foam Machine

The new CNMC-E2  air driven proportioning unit is of an advanced and compact design. It is specially aimed at the applications of polyurethane foam in place. Its particular configuration facilities easy access to all its components, simplifies the control functions ad significantly reduces the maintenance work.

Power source:230v single phase 230v 3 phase ,400v 3 phase ,50/60HZ

Whole power:7.5KW

Heater power:3kw each side

Heating hose power:1000w/15meters

Driven mode:Pneumatic

Air source:0.5-0.8MPa≥0.9m³

Chemical output:2-12kg/min

Maximum output pressure:17MPa

A and B chemical output ratio:1:1

Max hose support :90 meters 

 Polyurethane raw material

Water based Flexible PU foam is an environmental protection type using water as blowing agent, with good performances of low density ( 8~10kg/m³), open cell.

Typical Properties

Appearance: Light yellow to brown transparent liquid

Hydroxyl value:  100-200 mgKOH/g

Viscosity: 200-300 mPa.S/20℃

Specific gravity: 1.05-1.10 g/ml（20℃）

Storage Temperature: ≤25℃

Storage Stability: 6 month

※ Storage in dry original packing in recommended temperature