Views:33 Author:Site Editor Publish Time: 2020-10-19 Origin:Site
What are the requirements for the construction of one-component polyurethane waterproof coatings? Due to the advantages of the construction speed and shortened construction period of one-component polyurethane waterproof coatings, it is becoming more and more widely used in practical applications. Next, Hightop Machinery will mainly talk about its construction requirements!
The basic requirement for the construction of one-component polyurethane waterproof coating is that the base layer is flat and dry. For unevenness or a deformation joint of the base, the crack must be leveled with cement gauze, and a connecting pipe with the base must be firm for sanitary facilities, the joints must be tight, and the end must be smoother. The phenomenon of loosening is allowed.
The construction coating film of one-component polyurethane waterproof coating requires careful scraping. The coating film construction must be scraped three times. After the first pass is cured for 12-24 hours, the second brushing is performed at the same time. One direction of the scraping is perpendicular to the first coating direction, and the third pass is If a rigid protective layer is used on the coating film, in order to increase the adhesion between the waterproof layer or the rigid protective layer, generally, when the coating film has not been completely cured, a sparse surface is sprinkled with clean sand After the coating film with sand particles is cured, the protective effect of construction is carried out.
Pay attention to the additional waterproof layer in the construction of one-component polyurethane waterproof coating. Add a waterproof layer at the yin and yang angles, as well as the roots and cracks.
The above is about the construction introduction of one-component polyurethane waterproof coating. For more information on polyurethane, please continue to pay attention to the polyurethane manufacturer Hightop Machinery.
As a common product, high-pressure foaming machine has widely appeared in our real life, and the development trend is increasing:1. Polyurethane products are made of isocyanate and polyether as the main raw materials. Under the action of various additives such as blowing agent, catalyst, flame retar
The high-pressure foaming machine works for a long time, it is easy to heat up too high, what are the ways to cool down?Today, I will talk to you about the temperature reduction of the high-pressure foaming machine.Large flow box type high pressure foaming machineWhen using a high-pressure foaming m
Because foaming relies on heat, if there is no heat, the foaming agent in the system cannot evaporate and foam plastic cannot be formed. The heat comes from two aspects, one is the heat produced by the chemical reaction, and the other is the heat provided by the environment. The heat of chemical rea
A considerable part of auto parts, especially interior parts, are polyurethane foam products. The polyurethane raw material storage system, polyurethane raw material pre-mixing system, high-pressure foaming machine and molded foaming production line used in the production of polyurethane foamed auto
In order to meet the requirements of epidemic prevention and control, on the afternoon of February 6, Hightop Group held its 2020 annual summary and commendation meeting with the theme of "Gathering Strength and Breaking the Convention" at the headquarters of Hightop Group. The conference comprehens
Polyurethane foaming machine is a large-scale equipment, which is used in many production enterprises. The emergence of polyurethane foaming machine production line provides companies with a lot of convenience, and the performance of this equipment is also very good in all aspects. Many people are m
The high-pressure precision foaming machine is carefully designed by the designer according to the user, and there are many models of it. Users can choose the model that suits them according to their needs to purchase. The high-pressure precision foaming machine in the market is economical. It is ve
1. Raw material system. The pressure of the raw material tank should be dry air, and nitrogen should be used as much as possible. Before starting the machine every day, turn the turntable of the raw material filter to the left or right a few times, and remove 200~300ml of raw material from the botto
What are the key factors that affect the foaming process of the high-pressure foaming machine? As long as the polyurethane component materials (isocyanate component and polyether polyol component), the performance indicators meet the formula requirements. A high-pressure foaming machine can produce
As a common product, high-pressure foaming machine has widely appeared in our real life, and the development trend is increasing:1. Polyurethane products are made of isocyanate and polyether as the main raw materials, under the action of blowing agents, catalysts, flame retardants and other additive