Polyurea spraying equipment compared to manual hand brush construction advantages

The advantages of polyurea spraying equipment over manual hand brush construction:

First, extremely high coating efficiency. Spraying efficiency is as high as 200-300 square meters per hour, more than 10 times that of traditional roller construction.

Second, excellent surface quality. Spray coating is flat, smooth, dense, no brush marks, roll marks, and particles.

Third, prolong the service life of the coating. High-pressure polyurea sprayer can make the paint particles deep into the wall void, so that the paint film and the wall to form a mechanical bite, enhance the coating adhesion, and extend the service life.

Fourth, easily overcome corners, voids and uneven difficult to paint parts.

Fifth, save paint. Brush thickness is extremely uneven, generally in 30-250 microns, low paint utilization, while the high pressure polyurea sprayer is easy to obtain a coating thickness of 30 microns, relatively saving paint 20-30%.

Polyurea spraying equipment advantages:

1, with small size, light weight, low failure rate, simple operation, easy to move and so on;

2, the national advanced air exchange method, degree to ensure the stability of the equipment work;

3, four raw material filtration device can minimize the spraying clogging problem;

4、Multiple leakage protection system can protect the safety of the operator;

5、Equipped with emergency switch system, can cope with emergency situations;

6、Reliable and powerful 380v heating system can make the raw materials quickly warm up to the ideal state, to meet the equipment in the cold areas of normal construction.