Views: 10 Author: Site Editor Publish Time: 2021-06-04 Origin: Site
Because machinery and equipment are indispensable in our lives now, why do we say that? Because the times are advancing, the development of many of our industries is very impressive, and the development of many industries is inseparable from machinery and equipment, so many All of the machinery and equipment have been updated.
The technical content of the method of using foam as a thermal insulation layer on the roof is also gradually improving. There are a lot of machinery in our lives. Polyurethane foaming equipment is one of them. Although we may operate the PLC computer version of the polyurethane spraying machine strictly according to the steps, it is indispensable for maintenance, so let us come together next Take a look at how the PLC computer version of the polyurethane sprayer equipment is maintained, I hope it can be helpful to everyone.
The times are advancing, science and technology are developing, and the technical content of the method of using foam as a thermal insulation layer on the roof is also constantly improving. More and more PLC computer version polyurethane spraying machines will appear in our lives, and we should What methods should be taken to maintain the foaming machine?
1. For the windy season, the maintenance of the foaming machine should be done with butter, and the cleanliness of the butter should be observed. If it is dirty, it should be treated immediately, otherwise the wind and sand will cause serious damage to the equipment.
2. Before using the PLC computer version of the polyurethane spraying machine for a long time or not using it for a long time, it must be turned on and run for a period of time. Judging whether the machine has problems from the operating proficiency and sound of the machine, if there is a problem, repair it immediately. Cannot force boot operation.
3. If the equipment is not firmly fixed during construction, the equipment will also be damaged in the morning.
Do not underestimate the vibration of the PLC computer version of the polyurethane spraying machine. The power unit of the foaming machine will generate certain vibrations when it is working.
This kind of vibration will have a destructive effect on the foam production that has formed, and at the same time, if the vibration is too large, it will also cause damage to the instrument installed on the machine. Therefore, when installing the foaming machine, use anchor screws as much as possible and fix them on the ground. When the screws are loose, they must be tightened in time. If it is a mobile foaming machine, it is necessary to install a stable foot. When in use, lift the moving wheels to stabilize the foot and try to make the foaming machine have good stability, so as to produce better products.