Views: 1 Author: Site Editor Publish Time: 2021-06-24 Origin: Site
The electric super-capacity sprayer is popular with more and more vegetable farmers because of its convenient use and high work efficiency. It has become the main tool for pest control in the greenhouse. However, electric sprayers are relatively "precious". Once they are improperly operated and maintained in time, they are prone to malfunctions. How to maintain the sprayer in order to extend the service life of the sprayer, the reporter specially interviewed Manager Han, who is engaged in sprayer sales, and he suggested that vegetable farmers should do the following.
First of all, when using it for the first time, check whether the connections are leaking. When using, install the clean water test spray first, and then install the medicine. When adding medicine, add the medicine first and then add water, and the liquid level of the medicine should not exceed the safe water level. Before spraying, turn on the electric sprayer in advance to increase the air pressure in the barrel to the working pressure to ensure smooth spraying.
Secondly, after using the sprayer, clean the liquid medicine barrel, hose, spray rod and other parts first, and pay special attention to removing the grease on the pump and the dirt on the bottom recess of the liquid medicine barrel. Because most pesticides have a certain corrosive effect on the sprayer, after stopping it, it should be washed with alkaline water in time, and then rinsed with clean water. Especially after spraying Bordeaux mixture and other corrosive pesticides, it is best to soak in alkaline water for 12 hours. Take care to prevent rust. All parts that can be disassembled must be removed and cleaned. The inner pipe wall of the spray rod and nozzle should be painted with engine oil to avoid damp and rust.
If the sprayer is not to be used for a short period of time, the main parts should be cleaned, wiped dry and installed, and stored in a cool and dry place. If it is not used for a long time, grease all metal parts to prevent rust.
In addition, the core components of the electric sprayer are the water pump and the battery. Although there are several types of pumps on the market, these pumps are afraid of clogging. Therefore, it is necessary to use clean water to prepare the medicine. When adding water, it must be filtered with a small filter to prevent clogging.
Also, a special reminder to vegetable farmers: After the sprayer is deactivated, its battery should be fully charged and placed in a dry place in the shade, and charged once every one or two months. If the storage time becomes shorter, add distilled water to it in time.
CNMC-E3 polyurethane foam spraying machine shipped to USA.Voltage: 110V, equipped with 1 gun, 1 lifting pump, 1 Graco pipe, 1 round nozzle of gun, 2 meters of air hose, 1 tool box.
All family members:According to the provisions of the national statutory holidays, and taking into account the actual situation of the company, the following arrangements are made for the May Day holiday in 2023: I. Saturday, April 29 (Saturday) - Wednesday, May 3 (Wednesday) holiday transfer, a tot
Can you believe it? After spraying polyurea in the bamboo basket, the bamboo basket can be used to fetch water to make it drip-proof; after spraying polyurea on the outside of the watermelon, no damage can be seen even if it is dropped from the 15th floor.That's right, polyurea, the "king of coating
On October 22, the CNMC-E3 polyurethane spraying machine produced by Hightop was loaded in the Hightop Industrial Park and will be exported to Germany soon. CNMC-E3 polyurethane spraying machine is widely used in industrial maintenance, tunnel, subway, roadbed waterproofing, foam film and television
On October 22, the CNMC-E3 polyurethane spraying machine produced by Hightop was loaded in the Hightop Industrial Park and will be exported to Germany soon. CNMC-E3 polyurethane spraying machine is widely used in industrial maintenance, tunnel, subway, roadbed waterproofing, foam film and television
On October 16, Liu Xiaolin, Secretary of the Party Working Committee and Director of the Management Committee of Jining Economic Development Zone, Xu Gang, member of the Party Working Committee and Deputy Director of the Management Committee, and other leaders visited Gentop workshop to inspect and
All employees:According to the provisions of the national statutory holidays and the actual situation of the company, the following arrangements are made for the National Day holiday: 1. From October 1st (Saturday) to October 7th (next Friday), there will be a total of 7 days off;All day on October
On May 27th, the CNMC-E3 polyurethane spraying machine produced by Hightop Group was loaded in Wente Industrial Park and will be exported to the Russia. CNMC-E3 polyurethane spraying machine is widely used in industrial maintenance, tunnel, subway, roadbed waterproofing, foam film and television pro
On June 17, 2022, a group of 8 people including Jiemian News reporter Cheng, Yuguo reporter He,ebrun cross-border chief editor, Alibaba public relations manager Wang and other 8 people came to Hightop Group to make publicity reports and conducted a report on China's import and export forms. In-depth
Recently, Wang Hongwei, Member of the Standing Committee of Jining Municipal Party Committee and Deputy Mayor, led the on-site observation group of key projects in the city in the first half of 2022 to the production workshop of Shandong Hightop Group. Leaders of the Economic Development Zone, Gener
content is empty!