SIX STEPS OF POLYURETHANE FOAMING MACHINE OPERATION
Publish Time: 2020-10-14 Origin: Site
The correct operation of the polyurethane foaming machine is the prerequisite for the use of the polyurethane foaming machine. Below, what is the procedure for the polyurethane foaming machine to operate?
The first step of the operation of the polyurethane foaming machine, the polyurethane foaming machine uses a voltage of 380 volts, adopts a three-phase four-wire system, and the user connects the power supply according to the designated direction of the pump.
The second step of the operation of the polyurethane foaming machine is to add water to the water jacket of the two storage buckets and the air storage tank before using the polyurethane foaming machine, subject to the tube.
The third step of the polyurethane foaming machine is to supply the material of the polyurethane foaming machine pouring machine A and B. Open the automatic feeding port and open the automatic feeding switch to complete the automatic feeding process quickly and conveniently.
The fourth step of the operation of the polyurethane foaming machine, the polyurethane foaming machine sets the required time on the pouring machine computer, then opens the sample port cut-off door, turns on the automatic feeding switch, and weighs the discharge within the set time For weight and weight difference, adjust the A and B cut-off stations to balance the ratio of work needs.
The fifth step of the operation of the polyurethane foaming machine, the pouring time of the polyurethane foaming machine is set, and the required working time is set according to the required amount and the flow rate of the machine.
The sixth step of the operation of the polyurethane foaming machine, after the pouring time is set, turn on the air supply switch, pull the wrench switch to start pouring, and automatically stop when the set working time is reached, and then clean the remaining material.
The above is a brief introduction on how to operate the polyurethane foaming machine. If you have any questions, please call Hightop Machinery.