CNMC-E2 + POLYURETHANE RAW MATERIAL FOR SPRAYING MACHINE EXPORTED TO THE UNITED STATES
Publish Time: 2020-07-23 Origin: Site
CNMC-E2 + polyurethane raw material for spraying machine exported to the United States
CNMC-E2 Spraying Foam Machine The new CNMC-E2 air driven proportioning unit is of an advanced and compact design. It is specially aimed at the applications of polyurethane foam in place. Its particular configuration facilities easy access to all its components, simplifies the control functions ad significantly reduces the maintenance work. Power source:230v single phase 230v 3 phase ,400v 3 phase ,50/60HZ Whole power:7.5KW Heater power:3kw each side Heating hose power:1000w/15meters Driven mode:Pneumatic Air source:0.5-0.8MPa≥0.9m⊃3; Chemical output:2-12kg/min Maximum output pressure:17MPa A and B chemical output ratio:1:1 Max hose support :90 meters |
Polyurethane raw material Water based Flexible PU foam is an environmental protection type using water as blowing agent, with good performances of low density ( 8~10kg/m3), open cell. Typical Properties
Appearance: Light yellow to brown transparent liquid Hydroxyl value: 100-200 mgKOH/g Viscosity: 200-300 mPa.S/20℃ Specific gravity: 1.05-1.10 g/ml(20℃) Storage Temperature: ≤25℃ Storage Stability: 6 month ※ Storage in dry original packing in recommended temperature |
Inspection, Packing and shipping